"I dealt with over 30 suppliers when I built the Silver Spur and Hurst Driveline Conversions was the absolute best in customer service. Jeff and Scott always responded quickly and honestly with both technical help and quality products delivered. I was on a deadline to make the SEMA show in Vegas and their dedication to customer service was off the chart! Every time I called they took care of my need immediately including confirming the product ordered along with the tracking information for shipment. Their transmission kit bolted in without a hitch and continues to work perfectly going through the gears. I am in the process of restoring a 1970 Chevelle and their transmission kit will be going in it also."

Larry Mills
San Antonio, TX

As the owner of Street Shop, Inc. we exclusively use Hurst Driveline Conversion's Ultimate Fit TKO for our custom Corvette applications. We have been creating chassis and drivelines for Corvette "Retro-rods" for 7 years and have used transmissions from other manufacturers, however the quality, service, range of supporting components and knowledgeable sales staff at Hurst Driveline Conversions easily won over our business.

Tray Walden
President
Street Shop, Inc.
www.streetshopinc.com

An example of Tray's work using Hurst Driveline Conversion's kit

"I have always been a three pedal guy, and I wanted to add an overdrive to my factory four speed El Camino. The Hurst Driveline Conversions kit made replacing the old Muncie with a modern Tremec a bolt-in operation with some minor floor pan modifications and trimming. The installation notes section of the website was very helpful, and the Hurst Driveline ConversionsTech line helped us be sure we would have all of the parts we would need before we started the job. I couldn’t be happier with the conversion, and all of the components we purchased from Hurst Driveline Conversions were top notch."

Rick Love
Vice President
Vintage Air, Inc

Rick's El Camino with a Hurst Driveline Conversion's kit

"When Corvette Enthusiast contacted me and asked me to build the Carlisle Project “King Ray” Corvette for the 2006 Corvettes at Carlisle event, I happily agreed. I had a project plan in mind to build a 572 cubic inch powered 1967 Corvette with a Tremec TKO transmission. I was specific: I wanted the Tremec to be supplied by Hurst Driveline Conversions. From past experience I knew their product was of excellent quality but, more importantly, I knew their customer service and technical support was far superior to the competition. Hurst Driveline Conversions is the only place to get your Tremec TKO for your Corvette."

Jerry Clark
Jerry’s Vette Service

"I just got my TKO-600 from Hurst Driveline Conversions today. Thanks again, Jeff for all of your help - awesome service. I also can’t wait for the new offset shifter. I don’t know if you already purchased all of your adaptors, yokes, etc. yet but Hurst Driveline Conversions has some quality stuff. My integrated speedo cable fits like a glove."

Rick Streissguth (Ridgefield, WA)
1965 Chevelle